L-207A NOVACITE®
The Premier Product of Malvern Minerals Co.

Novacite® is a naturally occurring product. The chart below indicates typical particle size distributions. Generally the top size can be controlled through classification machinery; however, sub-sieve distribution and relation at left are impossible to predict with accuracy. The nature of fineness or coarseness changes with the crude ore.

Comprehensive Wet Sieve
& Average Particle Size

Micron
Diameter

U.S.
Series
No.

Percent
Finer
Than*

Fineness of Dispersion

30µ
20µ
15µ
10µ

475
625
950
1250
2500
12500

100
100
100
95-100
50
2

Hegman Fineness 6-7

Average particle Size (Range) Fisher 3µ to 5µ

* These values are averages


Platelet

General Information
L-207A Novacite® is the "star" of the Line. Normally the product will disperse to a 7 Hegman Grind. All Particles are individually platey with few clusters. 98% of the particles will fall between one and ten microns. L-207A as fine as it is still has the uniqueness of low binder demand with superior flow properties.

Typical Applications
Silicone rubber extender Silicone rubber dusting powder
Electrostatic coating Molding compounds Fluidized bed coatings
Casting and potting compounds Most all coatings and paints
Light diffusing characteristic control


Properties (Typical)

Specific Gravity

2.65

Index of Refraction

1.550

Color (Dry)

White

Color (Wet)

Grey-Tan

Oil Adsorption
(Spatula)

17-20%

Particle Shape

1-7 microns

Platey

Particle Shape

over 7 microns

Clusters

pH

6.0 -7.8

Acid Number

0-(-0-18)

Thermal Stability
(in its phase)

Absolute Zero
to 573°C.

Specific Heat
(Mean between 0-200°C)

.192 Cal/g/C°

Surface Modification

Very Receptive

Hardness

7 Mohs Scale

Moisture (Finished Product)
110°C 3 Hours

0.0%

Loss on ignition
(Typical) 1000°C 30 Minutes

0.20%

Loose Packed

50 Lbs/Ft 3

Dense Packed

80 Lbs/Ft 3

Chemical Analysis (Typical)

SiO2

99.490%

Fe2O3

.039

Al2O3

.102

TiO2

.015

CaO

.014

MgO

.021






Information contained herein is intended only for evaluation by technically skilled persons, and is to be used by such persons at their own discretion and risk. Such information is believed to be reliable, but Malvern Minerals Company assumes no responsibility for results obtained or damages resulting from such use. Typical properties and chemical analyses are intended as examples and are not to be considered as substitutes for actual analyses in those situations where properties and chemical compositions are critical factors. Sales of Malvern Minerals Company products shall be independent and subject exclusively to the terms and conditions set forth in Malvern's order acknowledgement.



Top of Page

Novacite® - Introduction and Applications
Novacite® Physical & Chemical Data

325 Novacite® || 1250 Novacite® || L-207A Novacite®

About Surface Modified Inorganics
Malvern Trademarked Products

Return to Home Page




Malvern Minerals Company
P. O. Box 1238
Hot Springs National Park
Arkansas, 71902
Tel: 501/623-8893  Fax: 501/623-5113